Basic Config
Call Protocol
MGCP
SIP
Use Standard Call Protocol
Enable
Hint Language
Chinese
English
Chinses first, English next
English first, Chinese next
Default Voice Code
G.711 a-law
G.711 u-law
G.722
G.723.1 5.3k
G.723.1 6.3k
G.729A
RTP Start Port
DTMF Parameter
DTMF send interval(range:80 - 200)
ms
DTMF send gain(range:-32 - 32)
Call Out From FXO Port When Network Is Down
Enable
Port Parameter
Port No.
Silence suppress
Send gain
Recieve gain
Flash min. time
Flash max. time
0(FXS)
Enable
ms
ms
1(FXO)
Enable
ms
ms
2()
Enable
ms
ms
3()
Enable
ms
ms
4()
Enable
ms
ms
5()
Enable
ms
ms
6()
Enable
ms
ms
7()
Enable
ms
ms
8()
Enable
ms
ms
9()
Enable
ms
ms
10()
Enable
ms
ms
11()
Enable
ms
ms
12()
Enable
ms
ms
13()
Enable
ms
ms
14()
Enable
ms
ms
15()
Enable
ms
ms
Silence suppress
Enable
Flash min. time
ms
Flash max. time
ms
FXS port send gain
FXS port receive gain
FXO port send gain
FXO port receive gain
Voice Parameter
Silence suppress
Enable
Flash min. time
ms
Flash max. time
ms
Send gain
Receive gain
Ring volume(range: -32 - 32,default is 0)
Hand off volume (range: -2 - 2, default is 1)
HandSet volume(range: -2 - 2,default is 1)
Notes:
(1) It must restart the device to take effect except for modification of port parameter.
(2) If the device register to platform of FREEGO, DON'T use standard call protocol.
(3) Please modificate the parameter around the default value to avoiding exception.
(4) Port send/recieve gain range: -10 - 10, flash min./max. time rang: 100 - 1000 ms.
Notes:
(1) It must restart the device to take effect except for modification of voice parameter.
(2) If the device register to platform of FREEGO, DON'T use standard call protocol.
(3) Please modify the parameter around the default value to avoiding exception.
(4) Send/recieve gain range: -10 - 10.