SIP科技,网络通讯专家,提供专业网络电话(VoIP)产品及解决方案

Home|Products|Solutions|Support|Download|Agent|Contact|Chinese

Overview Installation Specification Initial FAQ WEB Setup Advanced

VOIP

Telephony Gateway

普通图库 EIA2000 gateway

普通图库 VoIP Billing System

普通图库 Management System

普通图库 Freego softswitch

Broadband Phone

普通图库 SIP Phones

USB phone & Telbox

普通图库 Skype Telbox

普通图库 Skype Handset

普通图库 Skype Phonset

 

Wireless

普通图库 SENAO Wireless PBX

普通图库 Wireless Bridge/AP

普通图库 Wireless Router/AP

普通图库 Wireless Adapter

普通图库 Wireless Accesorries

 

Others

IPscan Proble

Axel Escapte Chute

 

Initial Configuration by Telephone Set

Freego EIA 2000 series gateway

 

Mode One [Dynamic IP]:

Set gateway to Dynamic IP mode:*150*2#,then you will hear a prompt message “setting successfully”, 5 seconds later, Power off and on gateway again.    

 

Mode One [Static IP]:

Set gateway to Static IP mode:*150*1#         

1)        Set gateway IP Address to:*152*192*168*1*100#, means local IP Address is 192.168.1.100

2)        Set gateway Net Mask to: *153*255*255*255*0#,means local mask is 255.255.255.0

3)        Set Router IP address:*156*192*166*1*1#, means local default gateway is 192.168.1.1

 

Remark: Each step done, you will hear a prompt message “setting successfully”, then hand up, then pick up the phone and continue next step. When all above four steps are done, 5 seconds later, Power off and on gateway again.

 

How to inquire information of gateway:

1)        Inquire Current IP Address of gateway: *158#

2)        Inquire Telephone phone number of each port: *114#

3)        Recall voice message of FXO ports:*195#

 

How to record a new voice message to FXO ports:

Key in*199#, then start to record the voice message, after recording, wait about 2 seconds,press symbol “#” to finish recording.

Remark: Recording length within 10 seconds.

Sample:

Pick up the ear phone, Dial *199#,then start recording:“Hello,Thank you for calling Octavo Cooperation,Please dial the destination number”,after recording, wait about 2 seconds,press symbol “#” to finish recording.

 

How to record a new voice message to a all FXO port gateway:

   First , We should connect a PSTN or an extension line to any FXO port, then dial the number which is connected to the FXO port, then you will get a prompt voice message ,key in *199# to start recording, after recording, wait about 2 seconds,press symbol “#” to finish recording.

 

How to transfer Forward [ peer to peer call only]

       *57* phone number #     Unconditioned

       *40* phone number #     Busy Tone

       *41* phone number #     No Answer

       *57#,*40#,*41#         Cancel above function

   About us | Jobs | Exchange Links | Advice us  | Site Map | Statement